|
The Roland OP-8 interface was designed to control Roland polyphonic synthesizers that were equipped with a DCB (Digital Control Bus) interface via the Roland MC-4 Microcomposer.〔page 1, Roland OP-8 Operation Manual〕 The OP-8 and synthesizer were connected together usin a DCB cable. The OP-8 and MC-4 Microcomposer were then patched together using patchcords via each of their patchbays.〔page 2, Roland OP-8 Operation Manual〕 The transpose control on the OP-8 was able to transpose the synthesizer up or down by one octave.〔 ==DCB Equipped Synthesizers== * Roland Jupiter 8 The Jupiter 8 needed minor changes in its circuit for setting up with the OP-8. This work was carried out by Roland.〔 * Roland Juno 60 When using the OP-8 with a Roland Juno 60 the connection and operation were extremely easy, as only the CV and gate input jacks, and the transpose switch were relevant.〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Roland OP-8」の詳細全文を読む スポンサード リンク
|